Milos Miladinov

Technician

Owner of lab “DentalTech” and dental training center "UglyTooth". Official KOL of Ivoclar. Author of "Shoot like a PRO" (www.dentalphotography.ro)

Kevin Chacon Perez

Dentist

Lic. Cirujano Dentista, Universidad Guadalajara Lamar, Guadalajara, Jalisco, México, 2012. *Diplomado en Prostodoncia Restaurativa y Estética en Colegio odontológico de Jalisco, Guadalajara, Jalisco, México 2015 * Diplomado en Ingles Medico en Colegio Odontológico de Jalisco, Guadalajara, Jalisco, México 2015. Especialidad en Orto-Odontopediatria, Centro de Estudios de Posgrado en Odontología, CEPO, Guadalajara, Jalisco, México, 2016. Docente en Centros de Estudios de Postgrado en Odontología de la clase de Fotografía Clínica. (Mexico)2016 Asesor de Clinica en Centro de Estudios de Postgrado en Odontologia. (Mexico)2016 Instructor y Organizador del Curso Diseño de Sonrisa (DSD), Técnica de Inyección y Fotografía clínica. 2016-2017-2018-2019. Curso Aplicación de Toxina Botulinica Terapéutica y Estética, Con Dr. Abraham Montes de Oca. 2017 Certificación Complete Clinical Orthodontics System CCO con el doctor Antonino Sechi 2017. Coordinador de Certificación en Botox y Acido Hialuronico (Fillers) por la American Assosiation of Aesthetic Medicine and Surgery. Dr. Sam Assassa. 2017-2018 Colaborador de Publicación en Quintaecense Flowable Inyection technique and Function, por el Dr. Enrique Diaz Guzman 2017 Certificacion Sistema ExoCad Digital con PlanMeca (OrthoAligners) 2017 Guillermo Escamilla V. Colaborador de Publicación en Quintaecense, Con el doctor Bill Robins DDS, MA. Houston Texas. Con el Tema Flowable Inyection and 3D Digital Smile Desing. Jefe Clínica Chacon Dental Group, Jocotepec Jalisco 2009-2020... Dictante del Curso Introduction a Odontologia Digital Mexico 2019-2020 Certificación del Sistema BPS dictado por Dr. Frank Zimmerling y TPD Thomas Doblander (ICDE) Ivoclar Vivadent Mexico 2018. Lider de Opinion de la casa comercial Ivoclar Vivadent Mexico 2017-2020 Lider de Opinion de 3Shape Latam (Mexico) 2019 Profesor de Instituto Multidisciplinario De Especialidades Dentales de la material Odontologia Digital 2020

Javier Paniagua Villar

Technician

-GERENTE DEL LABORATORIO DENTAL PROTESICO J.PANIAGUA EN MÁLAGA (ESPAÑA) - EXOCAD TRAINER EN CENTRO DE FORMACIÓN DENTAL JOBESA MALAGA Y JOBESA GRANADA (ESPAÑA) - TÉCNICO EN PROTESIS DENTAL POR INSTITUTO SANTA BARBARA EN MALAGA (ESPAÑA)

Ricardo Recena

Dentist

Ricardo Recena después de formarse como protesico en 1996 y dirigir un laboratorio dental en Springfield -OHIO USA, decide embarcarse en la carrera de odontologia y cursar un Master en Rehabilitación Oral en Brasil en 2002. Desde entonces se dedica en exclusiva a la Rehabilitación Oral con la filosofía de aprender, evolucionar, compartir y divertirse. Para ello hace uso de las herramientas digitales a diario y comparte su tiempo entre su actividad clínica y la formación docente. Ubicado en Fuengirola Malaga , tiene el compromiso de trabajar con protocolos digitales donde el tiempo y la alta calidad son factores clave. Licenciado en Odontología por la Universidad Metodista de Sao Paulo, recibe la homologación en la Universidad de Oviedo y cursa numerosos estudios de especialización, como el Máster en Prótesis Dental por la Associação Paulista de Cirurgiões Dentistas, para seguir actualizándose en las técnicas más avanzadas e innovadoras. A lo largo de su trayectoria profesional ha obtenido puestos de responsabilidad en clínicas dentales de prestigio y actualmente es Director Clínico de Xmilestudio. Además, Ricardo Recena Orlando ha combinado la práctica clínica con la labor docente y formativa, ejerciendo como profesor en diversas asignaturas en la facultad de Odontología de la Universidade Metodista de São Paulo y en cursos de formación de la Associação Paulista de Cirurgiões Dentistas.

David Garcia

Dentist

David García obtuvo en 1990 su diploma como técnico especialista en prótesis dental en Valencia "Escuela Juan Badal March" (CENTESA). Ese mismo año inicia su actividad profesional en Alicante. Desde Septiembre de 1991-2007 es propietario de un laboratorio en Vitoria-Gasteiz En los siguientes años se especializo por medio de diferentes cursos y periodos de practicas voluntarias con algunos de los mejores técnicos dentales estatales y europeos. A partir del 2007 es cofundador y director técnico del Laboratorio de prótesis dental Garbident S.L. y a partir del 2016 Director técnico del Laboratorio CORUS Garbident. En los últimos años a participado activamente en la investigación y desarrollo de proyectos para la implementación de la tecnología CAD-CAM en el laboratorio dental en colaboración con varias empresas del sector. KOL 3Shape para laboratorio en España KOL productos Zirlux HS España

Adamo Notarantonio

Dentist

Chairman of the American Board of Cosmetic Dentistry. Accredited Fellow in New York State for the American Academy of Cosmetic Dentistry. Accredited Fellow of the International Congress of Oral Implantologists.

Erkut Koca

Technician

Leading Turkish source in the field of education by creating the "Dental Technology" Youtube Channel. Owner of dental lab in Turkey. Founder of Messier 31 Dental Atelier

Jesus Ostos

Dentist

El Dr Jesús Ostos es Odontólogo Venezolano egresado de la Universidad Santa María (Caracas-Venezuela), en la misma Universidad realizó un Especialización en Estomatología Integral del Adulto. En el 2013 realizó su especialización en Implantología en el C.P.O. – Centro de Pós-graduação em Odontologia (Saõ Paulo-Brasil), con un enfoque Quirúrgico – Protésico – Periodontal. Homologado como licenciado en Odontología en España desde el 2014. El Dr. Jesús Ostos es especialista en Implantología y Rehabilitación Oral de referencia internacional. Su filosofía de trabajo esta orientada en el tratamiento integral del paciente combinando la biología, función, estructura y estética. Docente y colaborador en importantes universidades e instituciones como NYU (New York – USA) MU (Wisconsin-USA) UIC (Barcelona-España) UCV (Caracas-Venezuela) USM (Caracas-Venezuela) y Pontificia Universidad Católica del Ecuador (Guayaquil-Ecuador) Dictante de cursos a nivel internacional en más de 20 países alrededor del Mundo (España, Dubai, Arabia Saudita, Bahrain, Australia, Canada, Estados Unidos, Colombia, Venezuela, Argentina, México entre otros.

Daniel Domingue

Dentist

Mastership and Diplomate award from the International Congress of Oral Implantology. President and Founder of Acadiana Southern Society. Current President of Membership Committee Board of AAID

Sunil Abraham

Technician

Director of Technology at Jurim Dental Studio Chief Technology Officer at integratedDENTAL Digital Technology Administrator at Touro College of Dental Medicine. Co-Founder, Chief Technology Officer - CADpro Academy. Bachelors in Biology, Minor in C.S. from SUNY Old Westbury. 3Shape-Certified Trainer (TRIOS®, Design Studio®, Implant Studio®)

Jeffry Tobon

Technician

Co-founder of Digital Dental Craftsmen and the founder of Designlab Dental Inc.

Naren Rajan

Dentist

Assistant Director of Digital Dentistry at Touro College of Dental Medicine. Member of National Dental Honor Society and received his Fellowship in the AGD. Focus is incorporating digital impressions and workflow into general dental practice.

Pablo Espaillat Bobadilla

Dentist

Founder and Managing Director at Dental Digital Designs and Prosthodontist/Restorative/Reconstructive Dentist at Grupo Dental

Alberto Uranga

Dentist

Founder of the Mexican College of Digital Dentistry

Mark Chan

Denturist

High-end removable and implant prosthetics. Certified in Bio-logic, BPS, and SDC denture concepts and is a Zunst Zhan Werk “Art of Denture” award-winning Denturist

Alex Tiidu

Technician

Owner of Technocrat dental design studio in Moscow. Conducts courses in Belarus, Moldova, Georgia, Estonia, Norway, and Kazakhstan. Representative of Up3d in Russia.

Andrey Bachmago

Technician

Head of CAD/CAM development department in ARTICON LLC. exocad trainer. Founder of Youtube channel CAD/CAM DENTAL.

Bobby Boshoff

Technician

Bobby Boshoff is co-owners of OUTCAD, based in Cape Town, South Africa. Their careers started in 2005 when they did practical training in general dental laboratories. It was during their studies at the Tshwane University of Technology that they met. In 2008 they both acquired their four year Bachelor’s degree (B-Tech Dental Technology) and proceeded to work in leading Crown & Bridge laboratories for several years. They then furthered their careers as dental technicians and 3Shape CAD designers in a mass production milling center. It was during this period that they identified the need for skilled dental designers and in 2016 co-founded OUTCAD- an outsource design and training center. Bobby and Hanelize’s technical knowledge of analog, as well as digital workflows and extensive experience in both specialist laboratories and fast-paced mass production environments, has allowed them to collaborate with select high-end dental teams globally. Their combined strengths make them a formidable team, whether it be their meticulous design skills or practical training approach to make the 3Shape learning process seamless and enjoyable

Rami Aburadwan

Dentist

Dr. Carlos A, Ayala is a dental surgeon, orthodontist, and Master in Stomatology with a mention in orthodontics at the Peruvian University Cayetano Heredia. Latinamerican orthodontics association award winner in 2003 (aLaDo). Creator of “From Macro to Microphotocourse for comprehensive management of the light and optics for dental – photography” since 2013. Author of “The workbook”, 2016, Sao Paulo, Brazil, Quintessence editorial. Academic training: San Martin de Porres University, Faculty of Dentistry, 1994-2000. Cayetano Heredia University, Specialization in orthodontics, 2002-2005. Cayetano Heredia University, Master Degree in Stomatology with a mention in orthodontics, 2010-2012.

Step Toothmaster Bay

Technician

Step ToothMaster Bay, started his own laboratory, CDI Science, in 2009 specializing in Cosmetic Dentistry and Implant Restorations. He has fabricated thousands of life like restorations for some of the pickiest, influential Dentists in the country. As a lifetime advocate of education and learning the latest technology and techniques, Step continues to travel around the world. As an educator to both Dentists and Laboratory Technicians, Step ToothMaster Bay, CDT, DTG hosts courses in his own laboratory and speaks internationally as a Key opinion leader for several companies including GC America.

Pedro Cortes Puerto

Technician

Pedro Cortés Puerto nace en 1978 en Jerez de la Frontera (Cádiz), y estudia Prótesis Dental en Granada. En 2008 comienza a trabajar en Laboratorio Zinident, uno de los primeros laboratorios que se convirtió en centro de fresado. Es allí donde comienza su trayectoria en el mundo del Cad-Cam (3shaper,Exocad y Sum3d). En 2012 se muda a Barcelona y allí recibe la oportunidad en Ideas Medical Solutions de dirigir la sección de Cad (Exocad ,3shaper y hyperdent) y la sección de Formación. Actualmente Ideas Medical Solutions es uno de los centros de fresados de referencia y de los que más ha crecido en España. Tras varios años observando la falta de formación en el sector del Cad, en el 2019 Pedro crea 3Dentalclass junto a Víctor Relanzón Ibáñez (formador, socio y amigo ). 3Dentalclass es un centro de formación Cad relacionado con Cam. Allí comparten con sus alumnos su pasión por la enseñanza y transmisión de conocimientos de diseño, pensando en cómo se va a mecanizar.

Arian Deutsch

Technician

Arian Deutsch, CDT, DTG, is the Owner of Deutsch Dental Arts in Surprise, AZ, specializing in lifelike rehabilitation. He has trained with Daniel LeClerc, TD, Dr. Yvan Fortin and Frank Poerschke, MDT; is a published author; lectures nationally; and serves as adjunct faculty at the Arizona School of Dentistry and Oral Health. Deutsch won first place in Candulor’s 2012 KunstZahnWerk North American Competition and participates in the Arizona Dental Association’s Donated Dental Service program.

Digital Dental Craftsmen

Dentist

Oscar Galvis

Technician

Oscar Galvis is a Certified Dental Technician in Complete Dentures, as well as a Master Dental Technician. He has extensive experience in CAD/CAM, including implants, with both fixed and removable prosthetics, and is an expert in the All-on-Four procedure with being a part of over 800 surgeries. He holds a Bachelors of Health Science with an Allied Dental Concentration and a Masters of Science in Healthcare Management and Leadership. He currently works as an adjunct lecturer at NYCCT teaching complete denture courses and also works at his family owned dental practice where he runs the Removable and CAD/CAM departments. In the past, he has managed for large DSOs such as ClearChoice and has been affiliated with NYCCT and Rutgers School of Dental Medicine developing content for curriculums in the form of instructional videos for courses such as Complete Dentures, Occlusion, Pre-clinical Dentistry, Fixed Prosthodontics and more. With a strong passion for education, he has also lectured internationally with a goal of blending new technology with the experience of past techniques and theory, knowing when to use analog or digital methods, and providing a better experience for the dentist, technician, and patient.

Perez Giugovaz

Dentist

Odontólogo especialista en odontología digital, sobre plataformas Exocad, Meshmixer, BlueSkyPlan. Llevo más de 10 años trabajando con sistemas digitales aplicados a la odontología. Tengo Un centro de formación y soy dictante de cursos a nivel nacional e internacional.

Leon Gurgov

Technician

Leon Gurgov was born in Russia in 1988.He moved to Canada in 2005. He acquired an Advanced Diploma from George Brown College in 2010 and completed successfully the requirements of practicing dental technology in Ontario in 2011, being the youngest dental technician granted the title of Registered Dental Technician in the province. Leon is a member of the Association of Dental Technologists of Ontario (ADTO), a registered active member of the College of Dental Technologists of Ontario (CDTO), a member of Dental Technology Academy (DTA), of Aesthetic Design and Implant Academy (ADIA) and a member of the International Congress of Oral Implantologists (ICOI). To further his education in the field, Leon eagerly participates in all continuing education seminars and courses offered throughout North America and Europe. In addition, Leon also has attended a number of hands-on courses with great technicians of Dental Technology such as Lee Culp, CDT, Oliver Brix, CDT, Oliver Tric, CDT, Klaus Müterthies, CDT, Sebastien Mosconi, MDT, August Bruguera, MDT, Sacha Hein, MDT, Jungo Endo, R.D.T, Thomas Singh, MDT, Domenico Cascione, CDT. In 2016 Leon attended the BioEmulation Meeting and in 2017 he became an eLab instructor for North America, adding substantial knowledge and skills on his daily portfolio. With the recent transforming technology, he has delved in depth into the CAD/CAM applications for complicated and multiple restorations. His knowledge and expertise make him an asset for several companies when software improvements are being implemented. Leon’s extensive experience of working on highly esthetic implant supported restorations, his constant experimenting with different materials to achieve optimal aesthetic results, and the relentless drive to learn and apply innovative techniques to better the patient’s experience, are some of his pivotal qualities to building a solid foundation for his career in dental technology. His enormous home-based library is enriched frequently with vintage and contemporary books, magazines, manuals, related with principals of esthetics, a wide array of cases represented from technicians all over the world, with the advancement of technology and materials alike. His perpetual desire of expanding and improving his skills is fascinating and meticulously inspiring.

Martin Heiden

Dentist

General dentist from Copenhagen, Denmark - the home of 3shape. Trios Beta Tester. Main focus is sharing user-to-user knowledge about 3shape Trios hardware and software for the members of DDC.

Joshua Jackson

Technician

Exocad trainer. Founder of Evolve Dental Science.

Luigi Lanzo

Technician

Graduated in 1992, he immediately began collaborating with the important province of Messina before and of Turin a few years later. In 1996 decides to start his own dental laboratory by dedicating himself mainly implant prosthesis. Lecturer in Materials Technology dental and dental laboratory from 1997 to 1999 (Leonardo da Vinci Institute from Messina), starting in 2000, he has been turning all his interest to the metal-free materials. In 2007 he began his training and training deepening cad-cam technology by starting an increasingly significant collaboration with companies in the sector. In 2014, he an important collaboration with nationally important biomedical companies implant connections. In 2017 he became a co-founder “Technician Consultant” of 3D-DentalService S.r.l.s., a company that deals with consulting and sales of 3D dental equipment. In 2018 becomes regional president of AIOM Dental Technicians.

Carson Law

Denturist

Carson completed 3 years in a Biomedical Degree and then finished her Denturism Diploma in 2017. She now works as Esther Schwenning’s associate at Northern Lights Denture Clinic where they have turned their clinic into a fully digital practice as of January 2019. Together they are part of multiple Beta tester groups and are KOLs for Trios, 3Shape, Asiga, and Ivoclar. ​

Justin Marks

Technician

Justin Marks, CDT is the Founder and CEO of Arfona LLC, a tech startup specializing in digital manufacturing methods for dental prosthetics. He is also the owner of Master-Touch Dental Lab and an adjunct lecturer in the department of restorative dentistry at New York City College of Technology in Brooklyn, New York. An accomplished dental technician, educator and lab owner, Justin has lectured and taught courses on removable prosthodontics in more than 40 countries. Since 2008 Justin has dedicated most of his career to applying the computer-aided design and 3D printing technologies to removable prosthodontics and is credited with the invention of the world’s first 3D printed flexible partial denture. Justin holds his board certification as a dental technician in the complete and partial denture specialties and graduated Summa Cum Laude from Pace University with a BBA in marketing and management.

Anshul Mel

Dentist

Dr. Anshul Mel , A Bachelor in dental surgeon (B. D. S) through Rajeev Gandhi University (KLE Dental College) in the year of 2010. Master in dental surgeon ( M.D.S (Prosthodontics ) through Rajeev Gandhi University (AME’S Dental College) in the year 2014. He is practicing as a consulting Prosthodontist since 2014 with his company Digital Dental Laboratory in the name of “AUM SIDDHY PROSTHETIC CARE” since 2014 His skills include managing full mouth cases, various types of implant and prosthetic, cast partial dentures. His expertise is also in the knowhow of latest software to be used in dental, meshmixer, blender and slice 3d. He is an official Exocad trainer, Bredent India and a Member of Indian Prosthodontics Society He is also an Associate member of the 3D Printing World Community Club an initiative of Trinity Media & Marketing Solutions dental community Additional skill set is in digital dentistry, 3d model of bone or soft tissue, 3d model of intraoral scanning, Implant cast with lab analogue, Cast for dental aligners, TMJ appliance, Bite plane, Splints for full mouth rehabilitation, Guides, Implant placement, Guide for ostioplasty before implant placement, Guide for cancer surgery, Guide for orthoganthic surgery, Guide for tooth preparation, Guiding plan appliance for mandibulectomy, Obturator (hollow on request), space maintainer (metalprinting), Maxillofacial and craniofacial reconstruction prosthesis (Ti,PEEK)

Juan Carlos Palma

Technician

CEO at DentalCAD Academy Exocad Trainer Carestream Dental Trainer Dental Technician Studies, at “C.E.I.P. Ramón y Cajal” (Córdoba, Spain) Executive Coach specialized in the Dental Sector Expert in Dental, Traumatology and Veterinary CAD Design Developer of Implant, Interfaces, Attachments and Anatomies Libraries in Exocad® Professional Collaborator of different Universities and Schools Odonto-technicians in Europe and America Professional Collaborator of some International Implants Manufacturers Professional Collaborator of some International Milling Centers Director and Organizer of some Milling Centers Participant in numerous National and International Courses, Demonstrations and conferences Collaborator, Researcher, and Writer of I + D + I Clinical Cases and Doctoral Theses in Spain and America.

Alberto Corrado Palmas

Dentist

Italian dentist (Sardinian) expert in Eastern-Europe Cross-border Care. Expert in Dental Tourism. Author of 2 books about Dental Tourism. Dr. Palma is a promoter of the first petition for public dentistry in Europe. Founder of the Sos Dental Tourism General Hospital in Moldova. Center for Research and Development of the Bionic Mouth with Tele-Medicine protocol. Opinion Leader in Extreme Mouth Rehabilitations. To date, he has helped more than 2,000 patients and saved them over 20,000 dollars by working with the banks. He is also an activist dentist in Moldova, who fights for the human right to oral health. Currently, he is the resident CEO at Sos Dental Tourism | MOLDOVA.

Peter Pizzi

Technician

Peter Pizzi, CDT, MDT, FNGS, as an educator of dental technology and operatory procedures Peter has found an easy transition into the lecture/clinician circuit. His personal appreciation and expertise on all phases of crown and bridge, porcelain, Implantology, muscle function, mandibular physiology, ceramics and photography have made him a source of knowledge and motivation for his peers to draw from. Peter currently lectures nationally and internationally to both technicians and dentists for the communication process and a predictable outcome of success for the patient. · A technician since 1984 and a business owner and manager of Pizzi Dental Studio Inc. · A member of the American Academy of Esthetic Dentistry. · Graduate, Recognized specialist and Mentor of The Kois Center for Dental Excellence. · Board member of ASMDT (Association of Master Dental Technicians) · Teacher and educator in Master Dental technician program (New York University) · Technical Fellow of the NGS (Northeastern Gnathalogical Society) · Faculty, NYU school of dentistry · Executive Board Member of the NGS · Editorial Board of IDT, [Inside Dental Technology

Fernando Polanco

Technician

Fernando Polanco is a Dental Technician as well as a Computer Technician from Guatemala. In 2011 he became a Registered Dental Assistant in California. In 2013 he started his career as a CAD/CAM Dental Technologist at an in-house dental lab utilizing Cerec, 3shape, Exocad, CAM Sum 3D, Hyperdent, and Exocam. Fernando introduced the Artec Spider 3D facial scanner to digital dentistry in 2015. The Artec Spider offers great quality data and provides many solutions for all All-On-X, dentures, and implant overdenture cases. He has introduced many innovated concepts to digital dentistry. He loves to teach, help and share his knowledge with dentists and techs in this new digital era.

Daniel Portal

Technician

Daniel Portal is the owner of Portal Digital Dentistry. A company primarily focused on educating dental professionals around the world on the benefits of CAD/CAM technology in dentistry. As former Senior Product Support specialist for Exocad North America, he was responsible for educating Exocad resellers labs, and dentists. In this role, he traveled extensively to lectures and demonstrations at trade shows worldwide. Daniel has extensive experience in CAD/CAM having completed at Ameritech College in Draper, Utah in 2011. Shortly thereafter he became a dental technician with Arrowhead Dental Lab in Sandy, Utah. and later B&D Dental. At B&D Daniel learned the Exocad-based Origin CAD/CAM system. both for in- house production as well as technical support of end-user labs. In 2014. he joined ZahnTechnique in Miami FL, gaining experience with a variety of CAD/CAM systems, including Amann Girrbach.

Sevan Pulurian

Technician

Sevan Pulurian has been in the industry for 18 years, involved with CAD since 2002 when Nobel 2D opened the door to digital dental technology (cad). He has since then used many other systems and learned the ins and outs and flaws if Digital Dental Technology. Sevan is currently the director of Cad/Cam at Pacific Dental in Thousand Oaks California. Where he has perfected the art of 3Shape, creating many tricks and unlocking the true powers of 3Shape. Well known in the 3Shape community, Sevan strives to make the software better and help end users navigate the choppy water of being a new or advanced user.

Liviu Racovita

Technician

Dental technician from Moldova. Works with Dr. Alberto Palmas and is a member of DTG.

Dora Rodriguez

Technician

Dora is a dental technician specialized in immediate load dentures, A0X conversions, and full arch restorations. She was born in Portugal, Dora graduated in 2004 and immediately started working at the Malo Clinic in Lisbon, where Paulo Maló had developed the All-on-4® treatment concept. In 2007, the company expanded internationally and she became the lead tech of the removable department in Mahwah, NJ where the same concepts were followed and adapted. Since then, she perfected the immediate load approach, was involved with several Zygomatic implant loads and helped produce thousands of smile makeovers. In 2016, she opened ID Dental Studio working exclusively with full arch restorations and offering direct in-office support on immediate load dentures and AOX conversions. She has worked directly with well-known names in the industry like Thomas Balshi - developer of Teeth In A Day® Implant Treatment and Steve Park also known as @implantguru on instangram, among others. She also lectures for study clubs and small group practices that want to add these types of services into their practices.

Abigail Rojas

Technician

Abigail rojas. Nacio en 1980 en la hermosa ISLA DE MARGARITA – Venezuela. A sus 18 años fue a Caracas a estudiar y solo fue en 2001 cuando ingreso a estudiar Odontología luego de hacer muchos cursos de interés personal. En 2007 obtuvo su titulo como odontólogo e inmediatamente sigio un camino hacia el área de cirugía bucal hasta que en 2010 decidio cambiar su orientación hacia Odontología Estética, lo cual es una de sus grandes pasiones hoy en día. Al día de hoy tiene unos 6 años en conexión con el área de odontología digital, así como también grandes nexos con la fotografía clínica profesional dirigida a técnicos y odontólogos. Desde 2009 comenzo a dar cursos en entrenamiento en fotografía clínica y siempre con la utopía de mantenerse actualizado con la educación continua se abrieron puertas para dar conferencias, lecturas, otros cursos y algo que le gusta mucho que es el área de la docencia. ntre sus CV, encontraran destaques como DOCENTE de PREGRADO Y POSTGRADO en la UNIVERSIDAD SANTA MARIA (USM), así como también en UNIVERSIDAD CENTRAL DE VENEZUELA (UCV) e DOCENTE INVITADO a MAESTRIA de IMPLANTES Y POSTGRADO DE ODONTOPEDIATRIA en la USM. En el área de Odontología Digital, tiene muchísimas formaciones en EXOCAD, buenos conocimientos en inLab así como también grandes experiencias en CAM en marcas como VHF, CEREC, IMESCORE, ZZ. Pronto estara certificado como OFFICIAL TRAINER de EXOCAD y MEDIT.

Raymond Rophie

Dentist

PROFESSIONAL HISTORY EDUCATION 2001-2006 Universidad Tecnológica de México (UNITEC) School Of Dentistry Awarded D.D.S. degree August 2006 PROFESSIONAL ORGANIZATIONS 2019 Digital Dental Craftsmen Member 2018 Digital Dental Academy Mexico Ambassador 2018 Dental Implant Surgical Seminars Faculty member 2017 Blueskybio Clinical, Technical and CAD/CAM Specialist. 2017 Dental Technician Guild Affiliated Member 2017 Damage Goods Affiliated Member 2011 American Dental Association 2007 American Association of Cosmetic Dentistry 2002 Asociación Dental del Distrito Federal 2001 Asociación Dental Mexicana PROFESSIONAL LICENSES 2006 Mexico Board Of Dentistry (License #5395826) PARTICIPATION IN THE DENTAL COMMUNITY ORGANIZATIONS 2013-2016- Director of General Dentistry CAILPH (Centro de Atención Integral de Labio y Paladar Hendido) (Today called SUMA) Non Profit Organization dedicated to treating in a multidisciplinary way patients with Cleft Lip/Palate. From birth to adult ages, Plastic Surgery, OMF, ENT, Orthopaedics, Orthodontics, Language Therapy, Psychology, Facial Reconstructive Anaplastology, Reconstructive Implant, and Prosthetic Dentistry. Mexico City, Mexico. Lunes de Sonrisas para todos 2008-2016: Pro Bono program in my Private dental office, the third Monday of each month me, my Endodontist, Orthodontist and Periodontist would donate the day for the most needed providing FREE dental treatment for the patients, preventive care, operative dentistry, surgical procedures, root canals, prosthetic, in house dentures, smile designs (at that time was the powerpoint DSD when I heard of it back in 2013), orthopaedic appliances for kids, etc, this has been my most rewarding dental activity with the opportunity of helping more than 1,000 patients along 8 years. 2013-2015: Board Director of Dental Medicine in ALFAMED Hospital in Mexico City, Mexico. In charge of all the surgical, prosthetic and operative dentistry, OR schedule, Orthognathic Surgeries, Surgery First protocol, cleft lip and palate surgeries. CONTINUING EDUCATION Courses And Lectures Presented.

Joe Abad Santos

Technician

Joe Abad Santos is the man behind Virtual Axis 109 Dental Design. His dedication to quality and precision allows Joe to create masterpieces that put genuine smiles on faces. An engineer by nature, his early interest in mending things and his attention to detail have helped him succeed in the field of dental design. Joe has been working as an expert in his field since 1999. He started in New Hampshire as a Lead Captek Technician and was then sent to different states to learn at seminars and lectures, gaining expertise on topics like philosophy, research, and the application of dental designs. Joe then worked in Methuen, MA as a Production Manager, where he learned the flow of running quality production. From there, Joe began traveling to New York where to facilitate demos, as well as represent companies at national and international conventions. He was sent to Germany and Switzerland to receive training on how to install and use milling machines; Joe was also commissioned to train clients needing mechanical and technical support in the U.S. and abroad. Relocating to Connecticut, Joe started the Milling Center that helps manage the overflow production of big and small laboratories here in the United States and Canada. He also became the Chief Technology Officer for a dental lab in Phoenix AZ. Selected because of his skills and industry insight, Joe was asked to serve as a Beta Tester for some of the leading scanner and design equipment and software in the industry. He currently gives one-on-one CADCAM training to lab owners, and he is one of the familiar faces teaching the educational seminars on Exocad, CADCAM, Scanning, and CAM Nesting techniques during LMT Lab days. Being in the industry for more than 19 years, Joe is considered a master in his field and is highly regarded by his colleagues and patients alike. Joe is constantly striving to ensure he is educated on the newest technological innovations in the sector with the goal of providing the best service possible to his clients.

Ale Sanchez

Technician

Alejandro Sánchez Toro Alejandro nació en Málaga en el año 1973. Cursó sus estudios de Prótesis Dental en Granada y tras acabarlos, pasó a formar parte del equipo docente del Centro de Formación Profesional de Prótesis Dental Jobesa, donde impartió clases en el módulo de removible acrílico y metálico durante 8 años. Fue allí donde conoció a su actual pareja, y juntos fundaron su actual laboratorio, Sociodental, el cual dirige desde el año 1994. Durante ese tiempo, combinaba su trabajo de docente con el trabajo del laboratorio, y cuando el tiempo se lo permitía, seguía su continua formación, recibiendo todo tipo de cursos para ampliar sus conocimientos. Llegada la situación en la que el laboratorio exigía más tiempo de dedicación se vio obligado a dejar la docencia para dedicarse plenamente al laboratorio. En el 2006 se sube al tren de la tecnología adquiriendo el primer scanner y donde comienza su formación en el sector tecnológico Digital Dental de mano de las firmas digitales más importantes dentro del sector dental nacional e internacional. En la actualidad, y tras la experiencia de pasar por la 4ª generación de scanneres, 2 fresadoras e impresora 3D, el nivel de sus conocimientos CAD/CAM han hecho posible el reconocimiento nacional e internacional con colaboraciones con grandes empresas dentro del sector. Fruto de su constancia, esfuerzo y formación, le han llevado a ofrecer flujo FullDigital a clínicas de alto nivel, con un resultado de estética y funcionalidad excelentes y predecibles. Alejandro colabora actualmente con empresas tan relevantes como Phibo, AlphaBio Tec, Kulzer, HenrySchein y es Embajador de 3Shape España, con ellas realiza cursos y conferencias nacionales e internacionales. Tambien forma parte de equipos de trabajo en investigación y desarrollo de nuevos productos y protocolos de trabajo.

Seweryniak Przemek

Technician

Przemek Seweryniak graduated from Lund University’s School of Dental Technology in 1993. At age 23, he founded Cosmodent AB, a dental laboratory, in Malmö, Sweden. Cosmodent is now one of the most renowned dental laboratories in Sweden. The cases are made solely in full ceramics and more then 60% are aesthetic and functional cases. More then 75% of all incoming impressions today are from trios and his goal is to be 100% digital, eliminating analogue impressions by the end of 2019. He is a founding member of the Swedish Academy of Cosmetic Dentistry and gives lectures and hands-on workshops internationally and throughout Scandinavia. Przemek is the only ESCD Certified Dental Technician in Scandinavia. He is also the only Swedish Dental Technician who has received three gold and two Silver medals in the AACD annual Smile gallery competition and in 2017 he received the Sverker Toreskog Award. He started working with CAD/CAM in 2002 and he has been working with 3shape since 2006 and in house milling since 2008. Przemek has been a co-author on several studies on Zirconia where he works closely in cooperation with the University of Malmö. He is also a visiting lecturer at the University of Gothenburg.

Jacobo Somoza

Dentist

Jacobo Somoza exercises his private practice in Madrid as a specialist in Aesthetic Dentistry and Implantology. He has a degree in Dentistry from the "Instituto Superior das Ciencias da Saude-Norte", Porto Portugal. He has his specialty in Aesthetic Dentistry. Faculty of Dentistry of the Complutense University of Madrid, Spain. He has been a professor of the Clinical Implantology course at the Autonomous University of Madrid. She is a national and international speaker in areas such as Digital Dentistry and Guided Surgery In the area of ​​guided surgery, he helped and participated in the creation of the Nemoscan Software 2009-2012 of the company Nemotec. He has developed several patents with the company Nemotec, which includes: - Prosthetic abutment root shaped like a patient's root or socket, whether or not extracted from the CT / CBCT information of the patient, in 2011 (ES-2403554-A2) -Printed or milled guided surgery splints without metal sleeves in 2012 (ES-2425695-A1) He has a Digital training center in Madrid, Jacobo Somoza Institute, in which he is director where he receives students from all over the world for Digital education purposes. Also he has his own department of R&D where he performs new digital devices and protocols with his own group of engineers and laboratory technicians. He has developed several innovative digital work-flows protocols such as Ultraprecision guide that allows us to precise placement of implant with the aid of special guide without metal sleeves that allow us to finish the screwed implant provisional before surgery; Implant rehabilitation protocol in 2 or 3 appointments with facial integration; and 3D Smile Design without the use of extraoral devices.

Lorant Stumpf

Technician

Digital Master Dental Technician with 16 years of experience, who graduated at the College of Dental Technology in 2000. While working in Hungary, he mainly focused on conventional dentistry. However, he always showed eagerness for learning and incorporating new technologies. As a laboratory owner since 2007, he is constantly working on revolutionizing dental technology. Throughout this journey, he gained significant experience in the field of digital dentistry.

Renata Vano

Technician

enata Vano Technique in Prosthodontics – Senac- 1993; Specialist Tec. in Total Prosthesis – Senac – 2003; Profª – Graduação; Technique in Dental Prosthesis / Senac -2003-2010; Profª – Specialization Tec. in Prosthesis Total / Senac 2006-2010; Profª in the courses: Apdesp -SP / Senac – SP / Dental São Paulo -MT / Dental Globo – GO / HGEF – CE / Unimar -SP /; Dental IT-SP / Company owner – Mega Smile – courses and trainings – 2004; Technical responsible for the acrylic sector laboratory ERO dental prosthesis – 2001-2018; World Champion in Total Prosthesis – Utah – USA 2017; Member DTG – since 2017. Minister of National and International Courses and Lectures (Ivoclar Speaker – US). She is also one of the speakers on the upcoming event in São Paulo, Brazil on April 17, 2019.

Paul Zhivago

Dentist

Dr. Paul Zhivago received his Doctor of Dental Surgery degree from New York University College of Dentistry where he also completed his education as a Prosthodontist. He then trained at Columbia University College of Dental Medicine as a surgical and an implant fellow. He is a board certified Prosthodontist specialized in Esthetic, Restorative, and Implant Dentistry and lectures nationally and internationally on the topic of Digital Dentistry. Currently, he is a Clinical Assistant Professor in the Department of Prosthodontics at NYU College of Dentistry and teaches the digital dentistry course for the Post Graduate Prosthodontic Department.

Esther Schwenning

Denturist

Esther is a registered Denturist practicing that brings a wealth of enthusiasm to her industry. Between volunteering with the DABC for 6 years and now with the Curriculum Advisory Committee of Canada, she dedicates her free time to expanding her knowledge to her profession. Esther opened her own clinic in 2011 and took her first dive into digital dentures in 2012. Following this, she turned her clinic into a fully digital practice as of January 2019. Esther is a BPS trainer for Ivoclar and an instructor for Dr. Abe's SEMCD (Lower Suction Dentures). Currently Esther is a KOL for Ivoclar Vivadent, 3Shape and Asiga.

Carlos Parra Roger

Dentist

El Dr. Carlos Parra es Director del postgrado en Nuevas Tecnologías en Odontología de la Universidad Rey Juan Carlos. Profesor Colaborador del Master de Cirugía Oral, Periodoncia e Implantes de la Universidad de Málaga. Public Speaker de Air Liquide Medicinal España, y Nobel Biocare. Master en Cirugía Oral, Implantologia y Periodoncia. Postgrado en Ingeniería Biomédica .

Christian Brenes

Dentist

Dr. Brenes is a prosthodontist graduated from the University of North Carolina at Chapel Hill. His main interests are implementation of digital technologies in restorative and implant dentistry, smile design and Implant dentistry. He is an international speaker and also a clinical researcher. He is fluent in English and Spanish.

Sander Polanco

Technician

Sander is one of the co-founders of Digital Dental Craftsmen, he has been a dental technician for 23 years working in few laboratories in Brooklyn, NY before He opened his full-service laboratory Oral-Tech Dental laboratory in Staten Island, NY in 2004. He is currently the owner of FMR Prosthetic Center a subdivision laboratory dedicated for digital dental technology, implant planning assistance, and surgical guides fabrication in addition to a full range of full arch implant-supported prostheses and all-on-X treatments. He is also the Oral Architect for fixed treatments and full mouth rehabilitation applying digital technology and digital smile design. Sander currently manages the digital department developing new digital protocols for training and development at his laboratory and at Digital Dental Craftsmen center for CAD designing and technology. He also is part of the NYU continuing education program for full mouth rehabilitation where He assists in digital dental technology and fabrication of full arch implant prostheses and other implant services.

Jose Alberto Valenzuela

Dentist

IMPLANT DENTISTRY STUDY CLUB IN LOMA LINDA UNIVERSITY, 2004. EMPRESS ESTHETIC – EMAX TECHNOLOGY TRAINING IN LVI, 2007. DIPLOMA COURSE IN MISCH INTERNATIONAL IMPLANT INSTITUTE, 2008. AESTHETIC DENTISTRY CONTINUUM IN UNIVERSITY OF SOUTH CAROLINA, 2007. FIXED IMPLANT PROSTHETICS COURSE IN UNIVERSITY OF SOUTH CAROLINA, 2008. PUBLICATION ON “LABLINE” MAGAZINE DISTRIBUTED IN OVER 50 COUNTRIES IN 2016. CO-WRITER OF TWO CHAPTERS OF “DETALHES”, DOCTOR EDOARDO SOUZA JR’S BOOK. INTENSIVE COURSE IN SURGERY IN ILAPEO, CURITIBIA, BRASIL, 2017. TRAINING IN CAD-CAM ZIRKONZAHN TECHNOLOGY IN BRUNICO, ITALIA, 2017. COURSE IN i2 STRAUMANN BLX IMPLANTOLOGY FOR IMMEDIATE LOADING AND DIGITAL DENTISTRY IN MADRID, SPAIN. 2019.

Wolfgang Teiniker

Technician

Blender for Dental co-founder. B4D software delivery & trainer.

Carl Fenwick

Denturist

Instructor Ivoclar Vivadents Bio-functional. Prosthetics System (B.P.S) teaching both Clinical & Technical aspects and provides hands on courses training worldwide. KOL in Removable Prosthetics for Ivoclar Vivadent HQ

Amr Ekram

Dentist

EDS consultant of Oral & Maxillofacial Surgery in Egypt and a certified DHA Implantologist in Dubai, UAE. Former assistant professor at Cairo University. Vice president of Digital Dentistry Society in the Middle East.

Khaled Ekram

Dental Radiologist

KOL and trainer for Acteon Company. Implant Surgical guides from A to Z. Applications and integrations of CBCT in Digital Dentistry. CBCT from A to Z. Former KOL and speaker for Soredex, Acteo, Kavo Kerr Training center for Real Guide by 3Diemme, , Ondemand 3D, by Cybermed , Romexis Guide by Planmecha , Exoplan by Exocad & Implant studio by 3Shape

Luis Cuadrado de Vicente

Dentist

Medico Especialista en Estomatología Especialista en Cirugía Plástica Reparadora y Estética Director Centro i2 Implantología Madrid Coordinador Programa Implantología Universidad UDIMA. Madrid Coordinador Programa Estética Dental Universidad UDIMA. Madrid Director ITI Study Club Madrid 3 KOL 3shape,Ivoclar-Vivadent, Straumann ,MIS, Phibo, Ziacom…

Jiro Abe

Dentist

Dr. Jiro Abe graduated from Tokyo Dental College in1981. He developed the suction mechanism of mandibular compAuthor of “Successful Mandibular Complete Denture Suction for Everyone”, “4 Steps from Start to Finish Mandibular Suction Denture and BPS: a Perfect Manual-for All Types of Fully Edentulous Cases”, “4 Steps from Start to Finish Mandibular Suction Denture and BPS: a Perfect Manual-for All Types of Fully Edentulous Cases”, and “Mandibular Suction Effective Denture,The professional: Clinical and laboratory technique ClassⅠ,Ⅱ,Ⅲ - with Aesthetics”. Founder of Japan Denture Association. Former president of the Japan Plate Denture Association. Instructor of Ivoclar Vivadent BPS International Clinical and GC & MORITA Complete Denture seminars, the lecturer of the Japan Dental Association. International committee member of the American Prosthodontic Society since 2015.lete dentures in 1999 and published,”Successful Mandibular Complete Denture Suction for everyone”. He has been defusing it throughout the world since 2004. He was the director of the Academy of Clinical Dentistry from 1999 to 2005 and its councilor from 2005 to 2009. He founded the Japan Denture Association and has been its chairman from 2006 to 2015. He has stayed active as a former president of the Japan Plate Denture Association since 2015. He is the instructor of Ivoclar Vivadent BPS International Clinical and GC & MORITA Complete Denture seminars, the lecturer of the Japan Dental Association. He has been in various activities as a professor at the Tohoku University Graduate school of Dentistry since 2010 and at Kanagawa Dental College since 2012. Dr. Abe has also held many distinguished positions throughout the years and published Quintessence book. ”4 Steps from Start to Finish Mandibular Suction Denture and BPS: a Perfect Manual-for All Types of Fully Edentulous Cases” in 2012 and “Mandibular Suction Effective Denture,The professional: Clinical and laboratory technique ClassⅠ,Ⅱ,Ⅲ - with Aesthetics” in 2018, they were translated into English, Chinese and Korean. He has played active as an international committee member of the American Prosthodontic Society since 2015.

Nicolas Forero Triana

Technician

Nicolas Forero Triana nacionalidad: colombia edad: 24 años fui docente durante 2 años del programa TPD en mecanica dental del politécnico internacional en bogota, soy socio propietario del laboratorio labtek, socio y director en el centro de formacion axxes academia en la ciudad de bogota. distribuidor de exocad en colombia y especializado en el software desde basico a avanzado y colaboro en el en centro de fresado ADL (Dental manufacturing Tech) revisando control de calidad y diseños de estructuras sobre implantes.

Marina Ya

Technician

Expert on dental technology and clinical aspects of digital Smile makeovers within Implant Seminars in Miami Florida, GC America Educational center in Chicago, Illinois, Dentsply Sirona events and private dental practices. KOL for GC America.

Alan Jurim

Dentist

Director of Digital Dentistry at Touro College of Dental Medicine. Co-founder of Jurim Dental Academy. DSD Technology and Digital Dentistry Editorial Board Member. American Society of Dental Aesthetics. American Academy of Cosmetic Dentistry. American Dental Association. Nassau County Dental Society. New York State Dental Association. Dental Organization for Conscious Sedation. 3Shape Intra Oral Dental Advisory Board

Barbara Jurim

Dentist

Prosthodontist treating difficult restorative cases, implant dentistry, and challenging cosmetic cases. Assistant Director of Digital Dentistry at Touro College of Dental Medicine. Founding member of the Jurim Dental Academy and TRIOSDoctors.com. Accredited Member of the American Society of Dental Aesthetics. American Dental Association. American Academy of Cosmetic Dentistry. Nassau County Dental Society New York State Dental Association. American College of Prosthodontists

Eric Kukucka

Denturist

President and Owner of The Denture Center in Ontario. KOL for Ivoclar Vivadent, Nobel Biocare & 3Shape. Member of the Editorial Committee for Denturism Canada/Denturologie Canada, the official publication of the Denturist Association of Canada.

Peter Anastasia

Denturist

Certified BPS® dental laboratory focusing on quality removable prosthetics. Expert in digital dentures. KOL for 3shape, Ivoclar Vivadent and Asiga.

Juan Ballesteros

Dentist

El Dr. Juan Ballesteros Martínez se licenció  en Odontología por la Universidad Alfonso X EL Sabio (2004) en Madrid. Después cursó diferentes másteres  universitarios de Implantología, Periodoncia y Estética Dental. En el 2008, creó Clínica la Victoria, situada en Córdoba (España), donde desempeña su actividad clínica centrada en Implantología y Estética dental mediante flujos de trabajos digitales. Compagina su actividad clínica con la docencia, siendo profesor y Co-coordinador del Master de Cirugía Oral, Implantología y Rehabilitación Implantoprotésica de la Universidad de Córdoba. Profesor colaborador del Especialista en Implanto prótesis Avanzada de la Universidad Complutense Madrid, llevando el área de Odontología Digital. Participa como profesor invitado en numerosos master de Implantología de universidades españolas. En 2018 creó el “Curso de Implantología Digital, que se celebra en Córdoba, donde se da formación a clínicos sobre Cirugía Guiada y protocolos rehabilitadores sobre implantes en 1 sólo paso, incluido el Protocolo Medicalfit. Es colaborador y líder de opinión de  3 Shape y de la compañía de implantes Biohorizons-Camlog. Actualmente compagina su actividad clínica y  docente con el desarrollo de nuevos protocolos en Cirugía Guiada y rehabilitaciones Implanto-protésicas mediante medios digitales con diferentes empresas españolas.

Isaak Coimbra

Technician

Prosthetic expert. Technical consultant for OdontoMega. World Ambassador for HassBio.

Dhaval Patel

Dentist

Cerec expert. Graduate of the Sirona Speakers Academy. Dr Patel is the faculty member for Cerec for the PDS Institute. KOL for Dentsply Sirona, Ivoclar Vivadent, GC America and Kuraray Noritake. Founder of Facebook group, Keep Cerecing

Jae-min Lee

Dentist

Owner and a lead doctor of Mirero Dental Office. Advisory dentist of Osstem Digital. Speaker of 3Shape Korea

Pablo Espaillat Bobadilla

Dentist

Founder and Managing Director at Dental Digital Designs and Prosthodontist/Restorative/Reconstructive Dentist at Grupo Dental

Michael Scherer

Dentist

-Prosthodontics and implant dentistry in Sonora, California -Internationally recognized expert on dental implants, dentures, and digital technology

Hanalize Boshoff

Technician

-Dental Technology from Tshwane University of Technology graduate -Experience in Burchell Dental and Metal Free Dental. -CAD designs expert

Christian Castro

Technician

Christian Castro es de Colombia, tiene 24 años y es técnico dental hace 7 años. Maneja el software de Exocad desde el nivel básico hasta el avanzado y tiene experiencia dictando cursos nacional e internacionalmente. Estudio technica dental en Colombia y México. Christian a sido parte de compañías como Zirkonzahn Colombia en Bogota, Esthetic Dental Center en México. Trabajo para lideres de opinión de Ivoclar vivadent y actualmente tiene su propio laboratorio en la cuidad de Bogota llamado Christian Castro LabCenter donde hace cursos de diseno digital dental.